View IRS-A201ST01-R1_7484286.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

for reference only 1 / 20 m urata manufacturing co., ltd. ?? ??? {? pyroelectric infrared sensor product specification date 8 mar., 2010 J approved by prepared by m (scope) {??C????? ?C??g?? ??????? ???? ? ????????Bj this product specification is applied to dual element type pyroelectric infrared sensor ir s - a201 st01 - r1 used to security system, sensor light and consumer electronic equipment . please contact us when using this product for any other applications than described in the above. ? (murata part number) ???
for reference only 2 / 20 m urata manufacturing co., ltd. Q ( outline drawing and dimensions ) ?? 3 - 1 outline dimensions 1 ?? figure 1. outline dimensions 3.8 5.7 6.5 4.3 , gnd 4.8 2.5 6.7 4 - 0.8 0.55 0.55 0.55 1.4 2.0 1.4 2.6 ????R out put terminal (vout) ???` ???` g : : 0.2 unit: mm general tolerance : 0 1 x 0.8 top view bottom view ??R 1) power supply terminal ( vin )
for reference only 3 / 20 m urata manufacturing co., ltd. ? 3 - 2 equivalent circuit ? ( numbering ) ???`??? p art number and monthly number are numbering on the side of package . ? u? 4 - 1 part number code and trade code u?????u???? ???? part number code: 01 trade code: u? 4 - 2 production month u???`???????? printed on the top of sensor in eiaj code. ? (month) (year) n p q r s t u v w x y z a b c d e f g j m n r t u a b c d e f g h j k l m ? ?u??? 4 - 3 numbering example (october 2006) 0 1 ??R ( v in) `?R (vout) (gnd) ( rg )
for reference only 4 / 20 m urata manufacturing co., ltd. ?o? 2 5 50%rh r?? ratings and characteristics (25 ? c, 50%rh) ?R 5 - 1 responsivity (rv) min. typ. ?R responsivity (rv) 3.2 mvpp 3. 8 mvpp ?R?Jy????? responsivity is measured with following system. ? ?R?y figur e 2 . test system of responsivity ??Og? 5 - 2 balance of responsivity ??Og? balance 10% max. ? (%) ( r - l)/( r+ l) ? ?? r ??O? l ??O? balance(%) = |(rr - rl)/(rr+rl)| ? 100 rr : response from righ t element rl : response from left element \ 500k 140mm +5v 47kohm d s g ? ??????????? (1hz) mechanical chopper ( 1hz ) ?????????? (1hz) lock - in amp.(1hz) ???????? 22uf
for reference only 5 / 20 m urata manufacturing co., ltd. ?? 5 - 3 white noise level ?? white noise 2 5 0mvpp max. y ??? ???y??? ?y ??y gy? ?yh `???????By? conditions for measurement ? test circuit : w ith the circuit shown in figure 3 . ? measure point : across out and gnd. ? environment : in the electrically and optically shielded box kept at 25 ? c. ? ??y figure 3 . test circuit d g s 1n 47k 10k 10k 22u 2.2meg 10n 33k lm358 1n 10k 47u 22u 33k 22k 1n lm358 1meg 2 2n 33k 4.7k 5 vdc out gnd a gain:76.5db (x6700) a
for reference only 6 / 20 m urata manufacturing co., ltd. `?R 5 - 4 source voltage `?R ( s) source voltage(vs) 0. 2 to 2 .5 v y ??? ?d??y??? ?y ??y a gnd g ?yh ?`????y? conditions for measurement ? test circuit : with the circuit show n in figure 3 . ? measure point : across a and gnd. ? environment : in the electrically and optically shielded and temperature controlled box. ?rg 5 - 5 warm - up time ?rg warm - up time 30sec. max. y ??? ?d??y??? ?yh `???????By? ??`?R??_???rg?? conditions for measurement ? test circuit : with the circuit shown in figure 3 . ? environment : in the electrically and optically shielded box kept at 25 ? c. warm - up time is defined as time for source voltage to reach to specified value from turning on.
for reference only 7 / 20 m urata manufacturing co., ltd. ??R 5 - 6 supply voltage range ?X`? 5 - 7 recommend ed rs value Q s Q `? s ??g? ?? resistance rs is inserted across terminal - s and gnd. ??? 5 - 8 field of view 4 ??? figure 4 . field of view
for reference only 8 / 20 m urata manufacturing co., ltd. ???` 5 - 9 optical filter ?^ ??? | ? transmittance : the graph shown in figure 5 . material : monocrystalline silicon thickness : 0.5 5 0. 10 mm ? ??^ figure 5 . transmittance of optical filter (example)
for reference only 9 / 20 m urata manufacturing co., ltd. ??? ( operating temperature ) - ?? ( storage temperature ) - ????` ( recomme nded land pattern ) ? ????` figure 6 . recommendable land pattern 0.60 0.85 g unit: mm ??R vin power supply terminal gnd 1.1 4.7 1.20 1.25 2.9 `?R vout (out put terminal) gnd
for reference only 10 / 20 m urata manufacturing co., ltd. . ?`? ( soldering conditions ) ??``???? ??`???? ??`???? ??????? H?????_J?? ? following figure shows temperature profile when reflow soldering. ? cleaning after reflow soldering should not be applied. ? flow soldering should not be applied. ? please contact us when using other reflow profile except following reflow profile. ? ?`? fig ure 7 . soldering conditions u?????? peak temperature on product surface 240 , 5sec. max. temp.( ) time(sec.) gradual in air ?? heating 220 min. 2/sec. max. N?rg h eating period 80-100 sec. (20sec.min.) 30-40 sec.max. 120 sec.min. 240 220 180 150 100 pre-h eating 150 -180
for reference only 11 / 20 m urata manufacturing co., ltd. y?? ( package and marking ) ? 1 ` 1500 {`?????? ??`???`????r?????? ? rohs ????u??? rohs ??????? rohs - y ??? rohs ??? a b c ?????? ?????????????e? |??v ?????? ? the tape for pyroelectric infrared sensor shall be clockwise. the feeding holes shall be to the right side as the tape is pulled toward the user. ? a reel shall contain 1,500 pcs of pyroelectric infrared sensor and its reel label shall be clearly marked with part number , quantity , and inspection number. ? the product which has rohs - y<*> mark on the pack ag ing label is compliance with rohs directives. the alphabet in blank < * > will be changed a to b , b to c , and so on with every revi s ion of the rohs directive s . please refer to the document, "the marking for the directives on the restriction of the hazardous substances' use," to check the directives corresponding to alphabets in < * > .
for reference only 12 / 20 m urata manufacturing co., ltd. ? ??`? figure 8 . emboss tape 2.8 0.1 0.3 0.05 7 max +0.1 6.9 0.1 1.5 - 0.0 4.0 0.1 2.0 0.1 7.5 0.1 1.75 0.1 12.0 0.1 16.0 0.2 1.5 - 0.0 +0.1 7.1 0.1 (1) (2) (3) (4) ` reel ?`` trailer u?? sensor contained 160 - 1140 ? 330 wide 21.5 unit mm 400 - 560 100 - 200 100mm min. ???`?` cover tape `` leader `? weld ?? empty emboss
for reference only 13 / 20 m urata manufacturing co., ltd. ? ` figure 9 . reel size w1 : 17.4 1.0 w2 : 21.4 1.0
for reference only 14 / 20 m urata manufacturing co., ltd. ? y figure 10 . packing y?y packaging quantity & dimension of packaging y packing quantity d imension (mm) (pcs.) 1 , 5 00 (1 ` 1 reel) 350 350 120 3 ,000 (2 ` 2 reels) 4 , 5 00 (3 ` 3 reels) 6 ,000 (4 ` 4 reels) 7,500 5 ` 5 reels y packing quantity 7,5 00 pcs. ( = 1 , 5 00 pcs. 5 ??? ) big carton box : 7,5 00 pcs. max. (= 1 , 500 pcs. 5 reels) `???n ?? if there is space in the box, cushion is packed as shock absorber. y?y????o??? materials for packing and the packing amount might change the content without a previous notice. d w l ` reel ????????? outer box (carton box) ?? label ?? label
for reference only 15 / 20 m urata manufacturing co., ltd. m ( reliability ) ?????Yg???? 3 rg ??y????? judgment criteria for 11 - 1 to 11 - 7 . after each one of the test, the sensor is kept for three hours at room temperature, then it is evaluated with the following criteria. ? table1. judgment criteria ? items judgment criteria Q external appearance p? no significant d amage ?R responsivity ??? 20% ?? within 20% shift from initial value white noise ? + 100mv ? within initial value +100mv `?R source voltage ????? within rated value ?Y 11 - 1 high temperature ?? 100 ?? 500 rg ?? 10 0 ? c for 500hours ?Y 11 - 2 low temperature ?? - 40 ?? 500 rg ?? - 40 ? c for 500hours ??Y 11 - 3 humidity ?? 60 ? 95%rh 500 rg ?? 60 ? c, 95%rh for 500hours
for reference only 16 / 20 m urata manufacturing co., ltd. ??Y 11 - 4 heat cycle - 25 30 ? 30 55 30 1 ?? 20 R? ? 20 times of the following cycle - 25 ? c, 30min. ? room temp. 30min. ? 55 ? c, 30min. ? room temp. ?Y 11 - 5 vibration ? 10 55hz ? 1.5mm ? x,y,z 3 ? 60 ?? apply vibration of amplitude of 1.5mm with 10 to 55hz bands to each of 3 perpendic ular directions (x, y, z) for an hour. n?Y 11 - 6 shock ?n?YC?? 100g ?? x,y,z 3 ??? (1g=9.8m/s ) apply shock of 100g sinewave by standard shock tester to each 3 perpendicular directions (x, y, z). (1g=9.8m/s 2 ) ?? 11 - 7 soldering hea t ? ?`?????`??? `???`??? 2 times of soldering test on figure7. the second is returned to room temperature after the first soldering test .
for reference only 17 / 20 m urata manufacturing co., ltd. ? ( . caution ) ?? 12 - 1 limitation of applications u?????`??b????? ????m????????? ???????u???????? ????? please avoid using this product for the applications listed below which require especially high reliability for the prevention of defects that might directly cause damage to the third party's life, body or property . when this product is used for the applications listed below , we shall not be liable for any claims on the product. ?C C ??C ?kC ?C ??C???? ????C IC ??C??C 1. aircraft equipment 2. aerospace equipment 3. undersea equipment 4. power plant control equipment 5. medical equipment 6. transportation equipment (vehicles, trains, ships, etc.) 7. traffic signal equipment 8 . data - processing equipment 9 . application of similar complexity and/or reliability requirement to the applications listed in the above ?`?`?C? 12 - 2 fail - safe u???????????m ??`?`?C??? be sure to provide an appropriate fail - safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product.
for reference only 18 / 20 m urata manufacturing co., ltd. ??? ( caution in use ) O?r 13 - 1 notice in design ) ????m????`O? ?Y?????`?`????? ? in the case of outdoor use, suitable optical filter and water and humidity proof structure should be applied. ) ?????? to prevent failure or malfunction, please use a stabilized power supply. ) ???B?????`?? ?????_J?? please avoid using the sensor in the following conditions because it may cause failure or malfunction ; a) ??Cy?Ng???? ?L?? in such a fluid as water, alcohol etc . corrosive gas (s0 2 , cl 2 , no x etc.) or sea breeze. b) ??BA? in high humidity. c) ?????????????? in a place exposed directly to sunlight or headlight of automobile. d) ???? in a place exposed to rapid ambient temperature change . e) L?``?L???? in a place exposed directly to blow from air - conditioner or heater. f) ??? in a place exposed to strong vibration. g) ???? in a place exposed to strong electromagnetic field. h) ????????????? ?? in such a place where infrared ray is shaded. i) ? a h ????? in any other place similar to the above (a) through (h).
for reference only 19 / 20 m urata manufacturing co., ltd. ???r 13 - 2 notice in handling and storage ) ?????A??? optical filter of sensor should not be sc ratched or soiled. ) ??]???n??? strong shock should be avoided. ) ????????? electrostatics and strong electromagnetic field should be avoided. ) ?????`??????B??? sensor should be kept on conductive sponge. ) ??m???Cy?g? ????L???? high temperature, high humidity, fluid as water or alcohol etc., corrosive gas ( s0 2 , cl 2 , no x etc.) and sea breeze should be avoided. g?r 13 - 3 notice in mounting ?? ?? ?????A?? ?????A `???? cleaning after reflow soldering should not be applied. optical filter of sensor should not be soiled because it may cause failure or malfunction. u??????????B?????C??? ?{??d? ??????g?? please follow soldering condition s described in the specification. this product can permanently stop operating if the piezoelectric(pyroelectric) characteristic is decreased due to excessive heating. ( note ) ??H??u??g???B??u?_J?? please make sure that your product has been evaluated in view of your specifications with our product being mounted to your product. {??d????g?????? h???u???{??d??? you are requested not to use our product deviating from the agreed
for reference only 20 / 20 m urata manufacturing co., ltd. specifications. ??gY????vs?? d??m????????{? ?\?????|^?I??? ?v??e?g????? ?d????Z?? ?? ???e??s????? ? we consider it not to appropriate to include any terms and conditions with regard to the business transaction in the product specifications, drawings or other technical documents. therefore, if your technical documents as above include such terms and conditions such as warranty clause, product liability clause, or intellectual property infringement liability clause, they will be deemed to be invalid.

▲Up To Search▲

Price & Availability of IRS-A201ST01-R1

	To Download IRS-A201ST01-R1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .